Gas powered light industrial duty hand held Pressure washer. This unit is significantly more rugged that typical homeowner machines and comes with a durable steel frame. It has a strong 2.3 GPM Axial pump rated at 2400 PSI and a efficient Honda GC Engine for easy starts and long life
The PortaJACK-PRO floor tightening jack is a professional tool offering a durable design capable of standing up to the rigors of daily use. Constructed of the best material available and designed with the professional installer in mind, it is a precision built tool that can deliver more than a ton of force and will provide you years of quality service. The PortaJACK-PRO floor tightening jack is designed to hold flooring strips tight and keep in place for nailing. Can also straighten crooked or bowed flooring strips and hold in the nailing position. It can apply more than a ton of force and provide the hold necessary to free the installer’s hands for nailing. The PortaJACK-PRO is designed as one tool that will both push or pull the flooring strips tight. With its removable shoe you can efficiently position the jack on the floor or in the field of flooring without damage to the floor
The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti
PNI’s 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.
The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with
The MK-BX-4 uses a patent pending misting system to control dust generated during cutting. The ergonomically designed, easy to grip nylon handle with built-in lockable trigger switchhandle allows for easy operation and control for either left or right handed cutting. Unique features include a removable plastic tray and a locking table with an adjustable depth stop to prevent cutting through the table. Portable and lightweight, the BX-4 encorporates an Open-back design that allows for material up to 16" long and 5" deep to be cut and the plastic dust collection pan with replaceable dust filter make on site dust control a snap
The MK-101 Pro24 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The 101 Pro24 encorporates a variable height cutting head that allows for plunge cuts and use of blades smaller than 10" in diameter.The linear-bearing and chrome plated guide-bar assembly ensure precise cutting of tile up to 24" in length and 14" on the diagonal.
The MK-370EXP features a Powerful high-torque motor with a maintenance-free, self-lubricating pinion and gear-box assembly. The tilting head allows for precise 45º miter cuts and a Variable height cutting feature allows for plunge cutting up to 2". The 370EXP has a sliding aluminum die-cast cutting table that rips 18" tile and 13" on the diagonal. The 3/4" diameter chrome-plated linear guide-bar system and single piece zinc-plated steel frame provide rigidity, strength and durability. A simple, hinged blade guard enables easy blade changes and the removable thermoplastic water reservoir makes for easy cleaning and maintenance of the saw. This item comes with a heavy duty on/off switch, built-in water pump receptacle, and 7" diamond blade & submersible water pump included. One-year limited warranty
3/4" Square Drive Impact Wrench
Heat Gun 11.6A Varied Temp Kit
Tilt-Lok 7-1/4" Circular Saw with Case
1/2" Corded Drill 950 RPM Magnum
JET 27" x 48" Forks, 5,500-LB Capacity PALLET TRUCK -- 2-1/2" lowered height, 210 degree turning radius. One piece cast iron pump features high quality seals, hardened and chrome-plated ram and piston, top-of-stroke and overload bypass valves. Rounded fork tips with nylon guide rollers for trouble-free pallet entry and exit. Solid steel push rod never needs adjusting. Extra wide poly over aluminum steer wheels feature double sealed, lifetime lubricated bearings
JET 12-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards. See True Value # 724615
JET 2-1/4-Ton SHORT SERVICE JACK w/ Quick-Lift Pump -- Features automatic safety overload bypass system. Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering . "Quick Lift" pump feature with no load. Complies with ANSI/ASME PALD-10 standards